Power Tools

This belt and disc sander offers complete flexibility in the home workshop. The mitre gauge, tilting arm and unique upper table offer a wide variety of sanding operations from chamfers to compound mitres. The robust cast iron construction provides good stability and minimises vibration. Capabilities include horizontal and vertical sanding of various materials such as wood, plastic and aluminium. Fitted with a dust extraction outlet and a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Belt size   ...   915 x 100mm (4 x 36")
Sanding belt table   ...   100 x 152mm
Disc size   ...   200mm
Sanding disc table   ...   158 x 266mm
Table tilt   ...   0-45° worktable and
         disc table
Disc speed   ...   2850rpm
Weight   ...   20kg

General purpose five speed bench drill complete with 13mm capacity chuck ideally suited for the home workshop. It offers a fan cooled motor, depth gauge, a circular tilting table with a rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display packed on pallet.

Specification:
Motor   ...   250W
Drilling capacity   ...   13mm
Chuck capacity   ...   13mm
Collar diameter   ...   55mm
Spindle taper   ...   J33
Speeds (rpm)   ...   5 (600-2800)
Swing   ...   264mm
Spindle travel   ...   65mm
Column diameter   ...   60mm
Table diameter   ...   250mm
Throat depth   ...   160mm
Base size   ...   205 x 345mm
Height   ...   740mm
Weight   ...   35kg
VDE no-volt switch.

For general workshop use. Fully adjustable fence and workpiece holder. Powerful induction motor provides a morticing capacity of 1/2". Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with depth stop, work clamp, 3 piece chisel set (1/4", 3/8", 1/2"), chisel reducing adaptors, chuck and key. Display carton.

Specification:
Chisel capacity   ...   1/2"
Chuck capacity   ...   1/2"
Speed   ...   1500rpm
Max. chisel stroke   ...   120mm
Max. clamping height   ...   70mm
Table size   ...   150 x 340mm
Base size   ...   190 x 255mm
Fence to chisel centre   ...   84mm
Weight   ...   26.5kg
No-volt switch.

Powerful induction motor supports 1" mortice facility. Back, forth and lateral table movement allows for easy positioning of larger workpieces. Fully adjustable work clamps and depth stops allow for accurate morticing. Supplied complete with 5/8" chisel and bit, 19mm, 13/16" and 1.3/16" chisel bushes, 16mm chuck and key, work clamp and BS approved non-rewireable 3 pin moulded plug and 2M of cable. Display packed on pallet.

Specification:
Speed   ...   1500rpm
Chisel capacity   ...   1"
Chuck capacity   ...   16mm
Chisel stroke (max.)   ...   220mm
Workpiece height (max.)   ...   220mm (5/8" chisel)
Clamping height (max.)   ...   200mm
Chuck capacity   ...   16mm
Fence to chisel centre   ...   140mm
Table size   ...   400 x 150mm
Base size   ...   300 x 450mm
Weight (machine only)   ...   107kg
No-volt switch.

For general sanding applications around the workshop. Table tilt function 0-45° for easier working. Mitre gauge on table. Dust extraction facility. Powerful quiet induction motor. Supplied with one 305mm 80 grit self-adhesive sanding sheet. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Disc size   ...   305mm
Sanding disc table   ...   438 x 156mm
Table tilt   ...   0-45°
Disc speed   ...   1400rpm
Weight   ...   30kg
No-volt switch

A heavy duty model designed for use in the garage or industrial workshop. One coarse and one fine grinding wheel, adjustable eye protection shields, spark deflectors, wheel guards and tool rests. An integral cooling trough is included in the base of the machine. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Grinding wheel diameter   ...   200mm
Bore size   ...   16mm
Speed   ...   3000rpm
Machine dimensions   ...   400 x 245 x 270mm
Weight   ...   21kg

Designed for home and workshop use this bandsaw has an excellent performance and cutting capacity. The machine is supplied complete with mitre gauge, rip fence and dust extraction outlet. Facilities include a table tilt from 0-45° allowing straight cross cutting, ripping, mitre and bevel cutting. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Maximum cutting height   ...   90mm
Throat depth   ...   190mm
Cutting speed   ...   1134M/min
Blade length   ...   1425mm
Table size   ...   300 x 300mm
Table tilt   ...   0-45°
Weight   ...   15kg
No-volt switch.

Five speed bench drill complete with 13mm capacity chuck ideally suited for the DIY and hobby user alike. Fan-cooled induction motor. Square table with a rise and fall adjustment featuring a 0-45° tilt, left and right for ease of use. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Motor   ...   180W
Drilling capacity   ...   13mm
Chuck capacity   ...   13mm
Collar diameter   ...   40mm
Speeds (rpm)   ...   5 (550-2800)
Swing   ...   208mm
Spindle travel   ...   50mm
Column diameter   ...   46mm
Table size   ...   160 x 160mm square
Throat depth   ...   100mm
Height   ...   585mm
Weight   ...   18kg
No-volt switch.

12 speed heavy duty floor standing drill complete with 16mm capacity chuck (drilling capacity 32mm) suitable for the machine workshop. Driven by a 1100W motor for a powerful and efficient smooth running operation, it has a large adjustable tilting table complete with rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Carton packed on pallet.

Specification:
Motor   ...   1500W
Drilling capacity   ...   32mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   92mm
Spindle taper   ...   MT4
Speeds (rpm)   ...   12 (150-2700)
Swing   ...   508mm
Spindle travel   ...   120mm
Column diameter   ...   92mm
Table size   ...   475 x 425mm
Throat depth   ...   250mm
Base size   ...   580 x 450mm
Height   ...   1700mm
Weight   ...   148kg
VDE no-volt switch.

16 speed heavy duty bench drill complete with 16mm capacity chuck suitable for the machine workshop. The 16 speeds are driven by a powerful 650W motor giving total flexibility for drilling hard and soft materials. Fitted with sealed bearings as standard, it features an adjustable circular tilting table complete with rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Carton packed on pallet.

Specification:
Motor   ...   650W
Drilling capacity   ...   19mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (rpm)   ...   16 (120-3000)
Swing   ...   356mm
Spindle travel   ...   80mm
Column diameter   ...   80mm
Table size   ...   290 x 290mm
Throat depth   ...   180mm
Base size   ...   460 x 275mm
Height   ...   1000mm
Weight   ...   86kg
VDE no-volt switch.

16 speed heavy duty floor standing drill complete with 16mm capacity chuck suitable for the machine workshop. The 16 speeds are driven by a powerful 650W motor giving total flexibility for drilling hard and soft materials. Fitted with sealed bearings as standard, it features an adjustable circular tilting table complete with rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Carton packed on pallet.

Specification:
Motor   ...   650W
Drilling capacity   ...   19mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (rpm)   ...   16 (120-3000)
Swing   ...   356mm
Spindle travel   ...   80mm
Column diameter   ...   80mm
Table size   ...   290 x 290mm
Throat depth   ...   180mm
Base size   ...   460 x 275mm
Height   ...   1650mm
Weight   ...   98kg
VDE no-volt switch.

16 speed floor mounted drill complete with 16mm capacity chuck ideal for the maintenance workshop. The radial head allows the drill to be adjusted to any position where space is limited. Powered by a 370W motor offering highly efficient smooth running, it has an adjustable tilting table complete with a rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Carton packed on pallet.

Specification:
Drilling capacity   ...   16mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (rpm)   ...   5 (460-2890)
Swing (radial)   ...   840mm
Horizontal arm travel   ...   320mm
Spindle travel   ...   80mm
Column diameter   ...   70mm
Table size   ...   260 x 260mm
Throat depth   ...   380mm
Base size   ...   420 x 250mm
Height   ...   1630mm
Weight   ...   65kg
VDE no-volt switch.

The complete workstation to accommodate a variety of woodworking machines such as mitre saws; fretsaws; bandsaws; sanders and the like. 230V or 110V power sockets with three extension lead sockets each with 2M of cable. A machine can be held by means of two quick release mounts (fixing bolts included). The legs can be adjusted to suit user's height and there is movable light included for use in poor work conditions. A sturdy work vice secures smaller workpieces. Fold-away design with carry handles and wheel allows one person transportability between jobs. There are extendable roller support arms with full height adjustment and end stops for extra long workpieces. Display carton.

Specification:
Height adjustment   ...   650-790mm
Clamping depth (vice)   ...   345mm (max.)
Max. length (with extension)   ...   2920mm
Overall length (fully constructed)   ...   1805-3000mm
Weight capacity   ...   250kg (max.)

The complete workstation to accommodate a variety of woodworking machines such as mitre saws; fretsaws; bandsaws; sanders and the like. 230V or 110V power sockets with three extension lead sockets each with 2M of cable. A machine can be held by means of two quick release mounts (fixing bolts included). The legs can be adjusted to suit user's height and there is movable light included for use in poor work conditions. A sturdy work vice secures smaller workpieces. Fold-away design with carry handles and wheel allows one person transportability between jobs. There are extendable roller support arms with full height adjustment and end stops for extra long workpieces. Display carton.

Specification:
Height adjustment   ...   650-790mm
Clamping depth (vice)   ...   345mm (max.)
Max. length (with extension)   ...   2920mm
Overall length (fully constructed)   ...   1805-3000mm
Weight capacity   ...   250kg (max.)

This belt and disc sander offers complete flexibility in the home workshop. The mitre gauge, tilting arm and unique upper table offer a wide variety of sanding operations from chamfers to compound mitres. The robust cast iron construction provides good stability and minimises vibration. Capabilities include horizontal and vertical sanding of various materials such as wood, plastic and aluminium. Fitted with a dust extraction outlet and a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Belt size   ...   915 x 100mm (4 x 36")
Sanding belt table   ...   100 x 152mm
Disc size   ...   200mm
Sanding disc table   ...   158 x 266mm
Table tilt   ...   0-45° worktable and
         disc table
Disc speed   ...   2850rpm
Weight   ...   20kg

Ten speed positions allowing the user to carry out various woodturning operations. Fitted with a revolving headstock suitable for large and small bowl turning which can travel along the full length of the cast iron bed. The lathe is fitted with a powerful induction motor, no-volt overload safety switch and a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with purpose-made stand, tool rest, four prong drive centre and revolving tailstock. Display packed on pallet.

Specification:
Turning capacity;
- Diameter   ...   360mm
- Between Centres   ...   1000mm
10 speeds-variable    ...   500-2000 rpm
Spindle thread size   ...   3/4" x 16tpi
Spindle taper   ...   MT1
Overall length   ...   1560mm
Weight   ...   92kg
No-volt safety switch

This professional quality vacuum cleaner is driven by a powerful double fan motor giving strong suction and an air flow rate of 60L/sec. It has a 24L tank volume and 15L liquid capacity. The machine is fitted with an automatic power tool socket allowing the user to plug in a power tool (max. 2000W) to the cleaner and run it directly off the cleaner. The power toolÕs dust extraction facility is connected via the vacuum's hose with the whole operation controlled by the power toolÕs on/off switch. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.
The cleaner is supplied complete with the following;
•   Cartridge filter
•   Two paper dust bags
•   5M of flexible hose
•   Two steel extension tubes
•   Combination attachment for floors and carpets
•   Attachment for fluids
•   Furniture brush
•   Crevice nozzle
•   Upholstery attachment
•   Hand grip with air control
•   Adaptor for power tool dust extraction system
All accessories are 36mm diameter. 58mm diameter accessories are also available.

Specification:
Max. suction/vacuum   ...   25KPa (250mbar)
Max. air flow   ...   60L/sec
Tank volume   ...   24L
Tank capacity liquid   ...   15L
Dimensions:
- height   ...   600mm
- base   ...   420 x 420mm
Weight   ...   12.5kg


* For fine dust i.e. brick and coal dust
† Use cartridge filter Stock No. 33775
# Use cartridge filter Stock No. 33776

General purpose five speed bench drill complete with 13mm capacity chuck ideally suited for the home workshop. It offers a fan cooled motor, depth gauge, a circular tilting table with a rise and fall rack and pinion. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display packed on pallet.

Specification:
Motor   ...   250W
Drilling capacity   ...   13mm
Chuck capacity   ...   13mm
Collar diameter   ...   55mm
Spindle taper   ...   J33
Speeds (rpm)   ...   5 (600-2800)
Swing   ...   264mm
Spindle travel   ...   65mm
Column diameter   ...   60mm
Table diameter   ...   250mm
Throat depth   ...   160mm
Base size   ...   205 x 345mm
Height   ...   740mm
Weight   ...   35kg
VDE no-volt switch.

For general workshop use. Fully adjustable fence and workpiece holder. Powerful induction motor provides a morticing capacity of 1/2". Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with depth stop, work clamp, 3 piece chisel set (1/4", 3/8", 1/2"), chisel reducing adaptors, chuck and key. Display carton.

Specification:
Chisel capacity   ...   1/2"
Chuck capacity   ...   1/2"
Speed   ...   1500rpm
Max. chisel stroke   ...   120mm
Max. clamping height   ...   70mm
Table size   ...   150 x 340mm
Base size   ...   190 x 255mm
Fence to chisel centre   ...   84mm
Weight   ...   26.5kg
No-volt switch.

Ideally suited to the DIY enthusiast. Fitted with a front locking rip fence, mitre guide and extension wings. Facilities include rise and fall tilting arbor, ripping, straight, mitre and compound angle cutting. Dust extraction facility. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with TWO 40T T.C.T. blades. Display carton.

Specification:
Maximum depth of cut at 90°   ...   80mm
Maximum depth of cut at 45°   ...   55mm
Blade diameter   ...   254mm
Bore size   ...   5/8"
Speed   ...   4500rpm max.
Motor   ...   1500W
Work area   ...   950 x 637mm
Overall dimensions   ...   950 x 660 x 295mm
Weight (saw only)   ...   21kg
VDE no-volt switch

Powerful induction motor supports 1" mortice facility. Back, forth and lateral table movement allows for easy positioning of larger workpieces. Fully adjustable work clamps and depth stops allow for accurate morticing. Supplied complete with 5/8" chisel and bit, 19mm, 13/16" and 1.3/16" chisel bushes, 16mm chuck and key, work clamp and BS approved non-rewireable 3 pin moulded plug and 2M of cable. Display packed on pallet.

Specification:
Speed   ...   1500rpm
Chisel capacity   ...   1"
Chuck capacity   ...   16mm
Chisel stroke (max.)   ...   220mm
Workpiece height (max.)   ...   220mm (5/8" chisel)
Clamping height (max.)   ...   200mm
Chuck capacity   ...   16mm
Fence to chisel centre   ...   140mm
Table size   ...   400 x 150mm
Base size   ...   300 x 450mm
Weight (machine only)   ...   107kg
No-volt switch.

Expert Quality, versatile foldable portable workstation manufactured from heavy duty steel with aluminium and ABS plastic components. Unique ZOOM® System clamp action allows the rear jaw to close and lock in seconds. Extension allows extra long workpieces up to 1.1M in length to be worked on. Can be used with a variety of power tools for cutting, routing, drilling and assembly of mitre joints. Four working levels, ground, normal and two angled give maximum working flexibility. Incorporates vertical clamping system allowing workpiece to be positioned for general machining. Flat packed with presentational DVD and concise assembly instructions. Display carton.

Specification:
Width (extended)   ...   1510mm
Load capacity   ...   200kg (maximum)
Clamp capacity - horizontal   ...   290mm (internal)
Clamp capacity - horizontal   ...   1090mm (extended)
Clamp grip capacity - vertical   ...   30kg (maximum)
Angle grip capacity   ...   30kg (maximum)
Weight   ...   31kg (approx.)

For general sanding applications around the workshop. Table tilt function 0-45° for easier working. Mitre gauge on table. Dust extraction facility. Powerful quiet induction motor. Supplied with one 305mm 80 grit self-adhesive sanding sheet. Fitted with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Disc size   ...   305mm
Sanding disc table   ...   438 x 156mm
Table tilt   ...   0-45°
Disc speed   ...   1400rpm
Weight   ...   30kg
No-volt switch

Steel base and table with parallel action arm design which allows quick and accurate cuts. An integral dust blower keeps the cutting line clear and a dust extraction facility removes unwanted dust when connected to a dust extractor. The worktable tilts from 0-45°. Uses 127mm pin end fretsaw blades. Fitted with BS approved non-rewireable 3 pin moulded plug and cable. Display carton.

Specification:
Maximum thickness of cut   ...   50mm   
Throat depth   ...   400mm   
Blade length   ...   127mm   
Cuts per minute   ...   1400   
Stroke   ...   15mm   
Table size   ...   410 x 253mm   
Table tilt   ...   0-45°   
Base dimensions   ...   400 x 216mm   
Weight   ...   22kg